How to Install a LoRaWAN Gateway Step by Step

1. Install the antennas on the gateway at the coresponding areas where there is label on it

2. Use the M5 Allen key to open the shell of the gateway and insert the 4G sim card in the sim card slot

3.Plug in the external power supply

4.After connecting, judge whether the connection is normal according to the indicator light, green light is normal

5.After the connection is correct, close the top cover and tighten the screws with an Allen key.

6.Set the WIFI with your phone and make confirguration

7.Install the bracket

8.Install the gateway at a higher position, such as on a high wall or a bracket, to expand the signal coverage and reduce the impact of ground obstacles on the signal. At the same time, be sure to avoid mechanical collisions or environmental factors (such as high temperature and humidity) affecting the gateway.